Take a look: If you are able to access your roof, you can make a thorough inspection. If you’ve had a large storm recently, you may have lost some shingles. If you have shingles that are rotting or curling, water can get underneath and begin damaging the roof from underneath, leading to a leaky roof. Check to see how much of the area is missing. If it’s a small area, more than likely you can just do a roof repair as opposed to replacing the entire roof.

These shapes are often chosen depending on your house style and sometimes the geographic location. Although there are variations, the style of a roof will be classified into two categories – gabled or hipped. When using the roofing terms gabled and hipped you are referring to the elements of slope, overhang and peak style.

A sharp knife is handy for both removing the old material and installing the new stuff. Go with a model that allows you to change blades fast — without tools. I’ve found that knives with retractable blades tend to get gummed up with roof repairs tar. As such, I prefer a knife with a fixed blade. My preference is a Stanley Model 10-399.

It is obvious that you will have to keep certain safety precautions in mind when you are carrying out roof repair. Until and unless your roof is completely flat and is bounded by walls on all sides, you should take care of safety precautions and give a lot of importance to the risks.

Chances are, if you are reading this article you already have your mind set on fixing your roof yourself. Or, you are trying to decide if you really want to even bother trying to fix the roof company in Katy yourself. Either way, throughout this article you are going to find roof repair tips to save money and time.

When you are hiring someone to do your roofing repairs you want to speak to make sure that they are insured. You do not want to be responsible for someone falling off of your house. If they aren’t insured then you can be held responsible for them should an injury occur. A reputable company will have insurance on their employees so that you are not liable for their safety.

The most common cause of roof leaks are transitional roof areas: chimney, skylights, vents, valleys and dormer areas. Quite often the flashing is not installed correctly. Flashing is sheet metal installed at any transition point on an asphalt shingled roof to prevent leaks. If the flashing is not installed correctly the asphalt shingle roof is vulnerable to leaking.

Once the shingles are removed the decking is inspected for any water damaged wood or sagging joist. If any wood is damaged it is best to take care of it now because a lot of new shingles have over a 30 year warranty on them and you do not want to make any roof repairs that could void the warranty. Once everything is inspected and good to go, tar paper is laid and the shingles are put down.